1999 ford ranger 4x4 4,0 automatic. starts fine but after warms up about 20-35 MPH starts sputtering. could this be PVC?
Nov 10, 2012 at 12:35 PM
after warms up about 20-35 MPH starts sputtering?
ANONYMOUS
- MEMBER
- 1 POST
Advertisement
Hello,
It sounds like you might have a vacuum issue. Which includes the PVC.
First you need to check for vacuum leak.
You need to inspect the vacuum hoses for cracks or any type of deformities.
Many times a vacuum hose will crack at the joint. So pay close attention to those areas.
You can also test for vacuum leak by spraying carb cleaner into specific gaskets and joints. You will have to make sure the engine is running when you perform that test.
Here is a helpful video:
https://youtu.be/xN5pcM-5bso
https://www.2carpros.com/articles/how-to-use-an-engine-vacuum-gauge
Looks for any damages around the PCV hose and connectors.
I have attached diagrams for your reference.
Please let me know of any questions.
Thank you.
It sounds like you might have a vacuum issue. Which includes the PVC.
First you need to check for vacuum leak.
You need to inspect the vacuum hoses for cracks or any type of deformities.
Many times a vacuum hose will crack at the joint. So pay close attention to those areas.
You can also test for vacuum leak by spraying carb cleaner into specific gaskets and joints. You will have to make sure the engine is running when you perform that test.
Here is a helpful video:
https://youtu.be/xN5pcM-5bso
https://www.2carpros.com/articles/how-to-use-an-engine-vacuum-gauge
Looks for any damages around the PCV hose and connectors.
I have attached diagrams for your reference.
Please let me know of any questions.
Thank you.
Images (Click to enlarge)
Aug 15, 2021 at 5:06 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.