i do not have the use of the 4x4

1999 FORD F-350
226,000 MILES
Avatar
DAVEMAX
  • MEMBER
  • 2 POSTS
is the solenoid with the vacuum hoses at fault and be replaced if the 4x4 does not work if i use the electric selector switch on the dash? using the selector switch, the 4x4 doesn't work at all in 4x4 high or 4x4 low.
Dec 11, 2011 at 9:16 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,240 POSTS
Check to make sure the actuator on the transfer is getting power. If it is, remove the actuator and check for operation. They are known to go bad.
Dec 11, 2011 at 9:23 PM
Avatar
DAVEMAX
  • MEMBER
  • 2 POSTS
I'll try that next, thank you
Dec 11, 2011 at 9:29 PM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,240 POSTS
Dave,
Let me know what you find.
Joe
Dec 11, 2011 at 10:23 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.