Advertisement

why dont i have drive after changing my transfer case

Avatar
SLUYGUY
  • MEMBER
  • 4 POSTS
i just changed the transfer case in my 99 ford explorer and naw there is no drive or it seems like the braks are on i can feel it go into drive and wen i press the gas it jolts forword but no power just revs up it go's into revers secend first no problum i dont no whut to do
Nov 22, 2011 at 10:09 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
Is the trans fluid clean and full?
Nov 22, 2011 at 10:10 AM
Advertisement
Avatar
SLUYGUY
  • MEMBER
  • 4 POSTS
yes new fluids in transfer case and new in trans with new filter
Nov 22, 2011 at 10:14 AM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
Check to make sure none of the cooling lines were pinched and check the linkage to the trans.
Nov 22, 2011 at 10:21 AM
Advertisement
Avatar
SLUYGUY
  • MEMBER
  • 4 POSTS
whell all lines are good and the linkage well it is a awd part time im wundering if i have to reset the speed sensers or somthing is a electronic transfer case just a bolt in an it shood work or do i have to set reset somthing to make drive work
Nov 22, 2011 at 10:33 AM
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
make sure the transfer case is not in neutral position. this will make the vehicle not move.

Roy
Nov 22, 2011 at 10:38 AM
Advertisement
Avatar
SLUYGUY
  • MEMBER
  • 4 POSTS
no not in neutrel revers secend and first and the auto 4x4 4lo switch works in all the gears but drive i even turned the o/d on and off no diffrence
Nov 22, 2011 at 10:47 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement