remote lock/unlock

1999 FORD EXPEDITION
135,000 MILES • V8 • 4WD • AUTOMATIC
Avatar
MARK VEGELE
  • MEMBER
  • 4 POSTS
when remote lock/unlock is used front lights do not blink but rear lights do
Nov 20, 2010 at 7:23 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Have you checked relays?
Nov 20, 2010 at 8:14 PM
Avatar
MARK VEGELE
  • MEMBER
  • 4 POSTS
no what and where is the relay that would control the lights
Nov 20, 2010 at 8:20 PM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Check under the hood in the relay block.
Nov 20, 2010 at 9:40 PM
Avatar
MARK VEGELE
  • MEMBER
  • 4 POSTS
what relay runs the lights
Nov 20, 2010 at 10:10 PM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Hay,

Exact number I don't know. However, the cover of the relay block should identify what each relay is for. Also, chech your owner's manual. It should have it. If you still can't find it, let me know. I have the same vehicle. I'll see if I can find my owner's manual. It has to be around the house somewhere.

Nov 21, 2010 at 3:00 AM
Avatar
MARK VEGELE
  • MEMBER
  • 4 POSTS
i have a chilton's and the owners manual neither one tells me what relay runs the lights for remote locks and the relay box does not identify what they are for
Nov 21, 2010 at 3:21 AM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
I will check mine out and let you know what I find.
Nov 21, 2010 at 4:07 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.