Cranks wont start. Ran fine tell stop for gas now wont start.
have changed coil, plugs, wires, cap, rotor, tps sensor, compression at 120, getting fuel, 50 psi at rail.
Monday, March 3rd, 2014 AT 12:06 PM
3 Replies
HMAC300
MECHANIC
48,601 POSTS
Check crank and cam sensors scan for codes.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, March 4th, 2014 AT 7:27 AM
MR.ELDRIDGE
MEMBER
27 POSTS
Crank and cam sensirs good. Asd relay good.
Was this
answer
helpful?
Yes
No
Tuesday, March 4th, 2014 AT 10:19 PM
HMAC300
MECHANIC
48,601 POSTS
Check yoru anti theft and reset it it may be that then scan for codes it may be the computer or the crank sensore connection.