1999 Dodge Intrepid Power seat

1999 DODGE INTREPID
165,000 MILES • 3.2L • 6 CYL • 2WD • AUTOMATIC
Avatar
NET9
  • MEMBER
  • 14 POSTS
How can I manually move a power seat on a 1999 dodge intrepid?? I do not have access to a meter to check for power at the switch. The seat is in the fully reclined position and will not move in any direction. Is there a way to manually move the seat back up until I can get a meter to see if I have power to the switch?
Dec 15, 2013 at 7:55 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
other than disconnecting motor or getting power to the correct motor to mve it.
Dec 15, 2013 at 8:19 AM
Avatar
NET9
  • MEMBER
  • 14 POSTS
So if I disconnect the motor under the seat, I can manually move the seat?
If so how?
Dec 15, 2013 at 8:22 AM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
you will hav eot apply power to the motor or if you take the motor out you will have to lock seat in position somehow with a clamp or something similar.
Dec 15, 2013 at 8:23 AM
Avatar
NET9
  • MEMBER
  • 14 POSTS
Sounds good. Thanks for the help.
Dec 15, 2013 at 8:26 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.