Advertisement

MISFIRE

68,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
AUGUST SIUTA
  • MEMBER
  • 1 POST
Fault Code P0300 All plugs wires and coils have been replaced. If humidity is low no problem. When you first start the engine no errors. When you get up in temp the check eng.light will flash 12 to 30 times then stop and repeat a couple nore times. After about 5 miles the check eng.light will be steady with no more misfires. The engine runs excellent with no hesitance.

Thank you
August Siutya
Jan 13, 2011 at 10:47 AM
Advertisement
Avatar
ERNEST CLARK
  • ✓Experienced Mechanic
  • 1,730 POSTS
These are the possible causes for a "Multiple Cylinder Misfire":

Ignition system (Which includes primary/secondary)
Fuel System (From pump to injectors)
All wires/connectors in ign/fuel system
Restricted exhaust
Mechanical engine problem (broken valve/worn rings/oil in cylinder, etc)
Damaged trigger wheel (CKP)
Contaminated fuel
PCM (wires/connectors/grounds, etc)
Failing emissions systems (EVAP, EGR, etc.)
Feb 5, 2011 at 4:10 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement