SPONSORED LINKS

The engine idle falls & it stalls when you turn the wheel to the right or left?

Tiny
DANIEL C. SMITH
  • MEMBER
  • 1999 DODGE INTREPID
  • 107,000 MILES
The engine has just been rebuilt. We have replaced the cam sensor and the IAC motor once. We are replacing the IAC motor again today just in case the one we got was bad (just to eliminate that). Have you had any experince with the '99 Dodge 2.7 Liter engines and this stalling problem? Thanks.
SPONSORED LINKS
Thursday, April 12th, 2012 AT 11:46 AM

1 Reply

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
You need to clean the throttle body before changing the IAC again.

First eliminate all vacuum or air leaks in the system. You may have a bad IAC ( idle air control) but try cleaning the throttle body first. Remove the intake snorkel, have someone hold the throttle wide open for you and scrub the back side of the throttle plate and surrounding bore with an old tooth brush and some carb cleaner. Be sure to spray some into the small holes next to the throttle plate. That should help stabilize the idle.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, April 12th, 2012 AT 12:16 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links