How do you change the driver side low beam bulb on a 1999 Dodge Intrepid?
Apr 8, 2011 at 11:52 AM
Changing headlight blubs
LINDA KAUFFMAN
- MEMBER
- 1 POST
Advertisement
Release hood latch and open hood.
Remove jackscrews attaching headlamp housing to crossmember and remove the lamp housing to access the lamps).
Headlamp Bulb
Disconnect wire connector from back of lamp socket.
Rotate bulb (High beam or Low beam) and pull from headlamp housing.
INSTALLATION
CAUTION : Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
Place into headlamp housing and rotate to the lock position.
Connect wire connector to bulb.
Place lamp housing in position on vehicle.
Verify headlamp operation.
Install jackscrews to attach headlamp housing to crossmember.
Verify headlamp operation and alignment.
Remove jackscrews attaching headlamp housing to crossmember and remove the lamp housing to access the lamps).
Headlamp Bulb
Disconnect wire connector from back of lamp socket.
Rotate bulb (High beam or Low beam) and pull from headlamp housing.
INSTALLATION
CAUTION : Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
Place into headlamp housing and rotate to the lock position.
Connect wire connector to bulb.
Place lamp housing in position on vehicle.
Verify headlamp operation.
Install jackscrews to attach headlamp housing to crossmember.
Verify headlamp operation and alignment.
Apr 8, 2011 at 12:20 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.