How to remove window regulator, dront drivers side of 1999 Dodge Durango
Jan 23, 2011 at 8:08 PM
window regulator replacment
1999 DODGE DURANGO
MATTRW
- MEMBER
- 1 POST
Advertisement
RASMATAZ
- ✓ASE Certified Mechanic
- 75,992 POSTS
FRONT DOOR WINDOW REGULATOR
REMOVAL
Remove door trim panel. See: Body and Frame\Doors, Hood and Trunk
Remove inner belt weatherstrip. See: Window Seal\Service and Repair
Remove waterdam. See: Body and Frame\Doors, Hood and Trunk
Loosen bolts attaching lower front glass run channel to door inner panel.
Remove door glass.
Disconnect regulator wire harness.
Front Door Window Regulator
Fig. 39 Power Regulator Bolts
Remove screws attaching window regulator to door inner panel.
Remove window regulator from door.
REMOVAL
Remove door trim panel. See: Body and Frame\Doors, Hood and Trunk
Remove inner belt weatherstrip. See: Window Seal\Service and Repair
Remove waterdam. See: Body and Frame\Doors, Hood and Trunk
Loosen bolts attaching lower front glass run channel to door inner panel.
Remove door glass.
Disconnect regulator wire harness.
Front Door Window Regulator
Fig. 39 Power Regulator Bolts
Remove screws attaching window regulator to door inner panel.
Remove window regulator from door.
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Jan 23, 2011 at 8:58 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.