Someone broke the pcv valve on the passenger side valve cover and I cant figure out how it goes together
Thursday, February 6th, 2014 AT 9:56 AM
5 Replies
HMAC300
MECHANIC
48,601 POSTS
There is a grommet in valve cover that eh pcv goes into maybe it's missing or there is still a pieceof old valve in it. We have no pics of that
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, February 6th, 2014 AT 10:18 AM
JASONHARDRATH
MEMBER
3 POSTS
I bought a new grommet and p cv valve. The pcv valve is too small for the grommet. I can't figure anything else out
Was this
answer
helpful?
Yes
No
Thursday, February 6th, 2014 AT 12:06 PM
HMAC300
MECHANIC
48,601 POSTS
If yours is a straight design then try the other end or maybe the grommet is wrong. If you can use the old grommet. The pic that I am sending is what your should look like if not you have the wrong one. The single arrow goes into the grommet in the valve cover and the double arrow goes to the hose on the engine.
Image (Click to make bigger)
Was this
answer
helpful?
Yes
No
Thursday, February 6th, 2014 AT 12:32 PM
JASONHARDRATH
MEMBER
3 POSTS
No. I have the same pcv valve and it is too small for the grommet. Something is wrong with this. Check the dimensions of these parts and you will see.
Was this
answer
helpful?
Yes
No
Thursday, February 6th, 2014 AT 1:50 PM
HMAC300
MECHANIC
48,601 POSTS
I can't check the dimensions on it as I don't know what type it is. I just took apictureof the proper one so different valves could be made to different specs. You may have the incorrect grommet as well. I'd suggest you go back where you got it and see if you can either get the right one or the right grommet. They should be a direct fit.