My durango will not start, replaced the plugs and wires? Any ideas, is it the idle air cotrol sensor and where is that at?
Wednesday, November 9th, 2011 AT 4:53 AM
6 Replies
JACOBANDNICKOLAS
MECHANIC
109,755 POSTS
The iac is on the throttle body. It is responsible for maintaining idle. Even if it is bad, the engine should start if you push on the gas allowing air to enter the throttle body. Have you checked to see if there is spark and fuel to the engine? Has the check engne light come on?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, November 9th, 2011 AT 4:56 AM
RCCRISTAN
MEMBER
4 POSTS
The check light engine has not come on, when it did start prior to this it idled very high. Should I replace the iac? Or is it the fuel pump?
Was this
answer
helpful?
Yes
No
Wednesday, November 9th, 2011 AT 4:49 PM
RCCRISTAN
MEMBER
4 POSTS
It does start but once I take my foot off the gas it dies out.
Was this
answer
helpful?
Yes
No
+1
Wednesday, November 9th, 2011 AT 4:51 PM
JACOBANDNICKOLAS
MECHANIC
109,755 POSTS
It sounds like a bad IAC.
Was this
answer
helpful?
Yes
No
Wednesday, November 9th, 2011 AT 5:40 PM
RCCRISTAN
MEMBER
4 POSTS
Thanks for your help, the part should be here at 11:30, I will keep you posted !