1999 dodge dakota power window regulator replacement
Jan 15, 2011 at 8:33 PM
replace power window regulator
1999 DODGE DAKOTA
CAMPBELLJL1
- MEMBER
- 1 POST
Advertisement
RASMATAZ
- ✓ASE Certified Mechanic
- 75,992 POSTS
REMOVAL
Remove door trim panel.
Remove water dam as necessary to access window regulator.
Remove glass from door.
Fig.34 Power Regulator
Disengage power window motor wire connector from door harness, if equipped.
Fig. 39 Power Regulator Bolts
Loosen bolts in slotted holes attaching regulator to door inner panel.
Remove bolts attaching window regulator to inner door panel.
Extract window regulator through access hole in inner door panel.
Separate window regulator from door panel
Remove door trim panel.
Remove water dam as necessary to access window regulator.
Remove glass from door.
Fig.34 Power Regulator
Disengage power window motor wire connector from door harness, if equipped.
Fig. 39 Power Regulator Bolts
Loosen bolts in slotted holes attaching regulator to door inner panel.
Remove bolts attaching window regulator to inner door panel.
Extract window regulator through access hole in inner door panel.
Separate window regulator from door panel
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Jan 15, 2011 at 8:49 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.