Dodge Dakota Dash

6 CYL • 2WD
Avatar
GRADYC2
  • MEMBER
  • 2 POSTS
Asked a question the other day about my taillights and parking lights not working. Was told it was the light switch. Now, I have noticed that that when my left blinker comes on, my dash lights blink. Apply the brakes, dash lights come on. Now for the question. How do you get the dash panel off. 1999 Dodge Dakota.
Jan 3, 2011 at 4:27 PM
Avatar
BMRFIXIT
  • ✓Experienced Mechanic
  • 19,053 POSTS
Remove and check rear tail light bulbs and make sure have the correct bulbs in the correct place

as what you described is an indication of a wrong rear tail light bulb
Jan 3, 2011 at 5:15 PM
Avatar
GRADYC2
  • MEMBER
  • 2 POSTS
The bulbs are correct. How do you get the dash off.
Thanks
Jan 4, 2011 at 2:51 PM
Avatar
BMRFIXIT
  • ✓Experienced Mechanic
  • 19,053 POSTS
Recheck your light bulbs its wiring
this is what I have on removing the
INSTRUMENT CLUSTER
Removal & Installation
Disconnect negative battery cable.
Turn ignition switch to UNLOCK position.
Set parking brake.
On A/T equipped models, place shift lever into "L" position.
On all models, place tilt wheel in lowest position, if equipped.
Using a wide, flat-blade tool, pry around edge of instrument cluster bezel to release 9 snap clip retainers.
Pull instrument cluster bezel back far enough to unplug fog lamp switch, if equipped.
Remove instrument cluster bezel.
Remove instrument cluster screws.
Move cluster rearward. On A/T equipped models, remove shift indicator.
On all models, disconnect cluster wiring connectors.
Remove instrument cluster from instrument panel.
To install instrument cluster, reverse removal procedure
Jan 4, 2011 at 6:06 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle