1999 Chrysler 300

1999 CHRYSLER 300
188,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
300AZ
  • MEMBER
  • 1 POST
i have a 1999 Chrysler 300m that is not running.
one day i was driving, making a turn probably doing like 10 mph. as i turned the car turned off with no shakes or noises. i didn't run out of gas or anything. it wont start again. its not dead because the electrical system is on. as i try to turn on the car the engine cranks but it doesn't start. i took it to the shop and was told it was something electrical. called the electric mechanic and said it was the time belt. and the valves were damaged. that i have to replace that. rebuilding the engine i guess. need advice, do you think it could be something else. cant really afford to rebuild it.
Mar 14, 2011 at 4:08 PM
Advertisement
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,407 POSTS
That is indeed an "interference" engine meaning the pistons and open valves occupy the same space but not at the same time, at least unless the timing belt breaks. While it can break at any time, it's not real common for it to break at such a low speed. That might have saved some of the valves. As long as the front of the engine has to be disassembled anyway to replace the belt, it won't take much to perform a compression test or a cylinder leakage test to see if the valves survived
Mar 14, 2011 at 4:17 PM
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
Its an interference engine-when you crank it over do you hear any type of knocking noises on top side of engine? Inspect the timing belt start here
Mar 14, 2011 at 4:19 PM
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,407 POSTS
By the way, bent valves requires a valve job and new head gaskets. That's a far cry from a total engine rebuild. If you have more time than money, you might consider looking for an automotive program in a nearby community college. We were always looking for live work for our students. They are very well supervised but it could take a few weeks to get your car back. Also, the engine work will have to fit what they're currently studying so they aren't otherwise in competition with the employers who might hire the graduates.
Mar 14, 2011 at 4:22 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Ask a new question

Frequently Asked Problems for This Vehicle