is there any way to completely drain the transmission fluid including the torque converter?
thank you RON
thank you RON
May 16, 2011 at 4:10 PM
TRANSMISSION FLUID CHNGE
112652
- MEMBER
- 4 POSTS
Advertisement
No, you have to use a flush machine to do that.
May 16, 2011 at 5:28 PM
If you pull the pan and remove the screens, there is a 7/16" pipe plug that can be removed to drain the side and a portion of the torque converter. it is under the front portion of the screen that is shaped like a dog-leg(pan-handle). You will accomplish about 7.5 to 9 quarts of fluid removed, out of the 12 quart dry(total) capacity. That is about the best you will do as far as a drain and refill.
May 16, 2011 at 7:03 PM
Draining the lower pan and the side cover still leaves the torque converter full which cannot be drained. I will be very surprised if you get more than 6 or 7 quarts out that way and the entire capacity is 15 quarts, not 12. This still leave a flush machine as the only method to perform a complete fluid change.
May 16, 2011 at 7:15 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.