pump making noise
Nov 28, 2011 at 9:32 PM
how do you change power steering pump
1999 CADILLAC DEVILLE
YOLEVIN1
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
1. Remove serpentine belt. Remove or reposition, as necessary, coolant reservoir, idler pulley, power steering pump pulley and strut housing tie bar. See POWER STEERING PUMP PULLEY.
2. Disconnect pressure and return lines from pump, and plug all openings. On vehicles with pump adapter, disconnect return line from pump adapter using Quick Connect Separator (J 36391). On all vehicles,
remove pump mounting bolts. Remove pump adapter (if equipped). Remove pump.
3. To install, reverse removal procedure. Fill and bleed hydraulic system. See HYDRAULIC SYSTEM BLEEDING under LUBRICATION.
there is a special tool to remove teh pulley and reinstall it. this may need to be taken off before removing pump. autoparts store may have the tool available.
2. Disconnect pressure and return lines from pump, and plug all openings. On vehicles with pump adapter, disconnect return line from pump adapter using Quick Connect Separator (J 36391). On all vehicles,
remove pump mounting bolts. Remove pump adapter (if equipped). Remove pump.
3. To install, reverse removal procedure. Fill and bleed hydraulic system. See HYDRAULIC SYSTEM BLEEDING under LUBRICATION.
there is a special tool to remove teh pulley and reinstall it. this may need to be taken off before removing pump. autoparts store may have the tool available.
Nov 28, 2011 at 9:59 PM
Advertisement