brake lights

1999 ACURA TL
220 MILES • 3.2L • V6 • FWD • AUTOMATIC
Avatar
LALOPABLO1312
  • MEMBER
  • 1 POST
The brake lights don't work once I press on the pedal I ck the sensor and fuses there all good the regular lights work just fine
Jan 16, 2015 at 5:52 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
se fuse 47 & 49 have power going to them then see if wht/blk wire going to failure sensor in lh side of trunk has power if it does the sensor is probably bad or a bad ground going to that. that particular ground is also for the lights so check that as well its in lh side of trunk as well. also check for power where pointed out in pic.
Image (Click to enlarge)
Attached Media
Jan 17, 2015 at 6:35 AM
Avatar
DONALDC
  • MEMBER
  • 1 POST
I have a 2000 Acura tl 3.2l and the brake lights will not work when I press the pedal. All other lights work including the high mount brake. Also my signal lights stay constant and do not flash.
Oct 7, 2018 at 8:12 AM (Merged)
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
The turn signals not flashing is most probably due to a faulty flasher relay.

Check the brake light failure sensor at rear corner of trunk for the non working brake lights.
Oct 7, 2018 at 8:12 AM (Merged)