Brake lights

LALOPABLO1312

MEMBER
1999 ACURA TL
3.2L
V6
FWD
AUTOMATIC
220 MILES

The brake lights don't work once I press on the pedal I ck the sensor and fuses there all good the regular lights work just fine

Friday, January 16th, 2015 AT 5:52 PM

3 Replies

HMAC300

MECHANIC
48,601 POSTS

Se fuse 47 & 49 have power going to them then see if wht/blk wire going to failure sensor in lh side of trunk has power if it does the sensor is probably bad or a bad ground going to that. That particular ground is also for the lights so check that as well its in lh side of trunk as well. Also check for power where pointed out in pic.

Image (Click to make bigger)

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

+1

Saturday, January 17th, 2015 AT 6:35 AM

DONALDC

MEMBER
1 POST
2000 ACURA TL
6 CYL

I have a 2000 Acura tl 3.2l and the brake lights will not work when I press the pedal. All other lights work including the high mount brake. Also my signal lights stay constant and do not flash.

Was this

answer

helpful?

Yes

No

+2

Sunday, October 7th, 2018 AT 8:12 AM (Merged)

KHLOW2008

MECHANIC
41,814 POSTS

The turn signals not flashing is most probably due to a faulty flasher relay.

Check the brake light failure sensor at rear corner of trunk for the non working brake lights.

Was this

answer

helpful?

Yes

No

+3

Sunday, October 7th, 2018 AT 8:12 AM (Merged)