Remove the plastic cover on the belt tensioner using a small screwdriver. Use a wrench and turn clockwise as far as possible to relieve the load on the belt. Then remove the belt. To replace the tensioner, remove both mounting screws from the auxiliaries belt bracket for the belt tensioner. Remove the tensioner. Install the new belt tensioner. 15Ft. Lbs torque spec for tensioner. Ensure the belt is correctly seated in all grooves on each pulley. If you do not have a belt routing diagram, be sure to draw one out on a piece of paper.
SPONSORED LINKS
Wednesday, December 31st, 2014 AT 6:29 AM