how to replace the heater fan blower motor
Dec 3, 2010 at 12:36 AM
heater fan blower motor
1998 SUZUKI SIDEKICK
STINGYWIDIT
- MEMBER
- 1 POST
Advertisement
KHLOW2008
- ✓ASE Certified Mechanic
- 41,814 POSTS
BLOWER MOTOR
Removal & Installation
Disconnect negative battery cable.
Remove glove box and instrument panel support.
Remove relays and relay bracket from blower motor case.
Remove blower motor electrical connector.
Disconnect fresh air control cable from blower motor case. See Fig. 1 .
Remove blower motor screws and blower motor from case.
To install, reverse removal procedure.
© 2008 Mitchell Repair Information Co., LLC.
Removal & Installation
Disconnect negative battery cable.
Remove glove box and instrument panel support.
Remove relays and relay bracket from blower motor case.
Remove blower motor electrical connector.
Disconnect fresh air control cable from blower motor case. See Fig. 1 .
Remove blower motor screws and blower motor from case.
To install, reverse removal procedure.
© 2008 Mitchell Repair Information Co., LLC.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Dec 5, 2010 at 1:10 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.