1998 Saturn Sl1 Car Running Pretty Rough Check Timing

1998 SATURN SL1
165,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
The car is running pretty rough. How do I check the timing?
Dec 3, 2012 at 7:02 PM
Advertisement
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Are you talking about the cam timing? Also why do you suspect the timing? Could be a stuck egr valve or plugs and wires?
Dec 3, 2012 at 8:59 PM
Avatar
JDENTON83
  • MEMBER
  • 7 POSTS
I replaced plugs and wires within the last six months. It just started running rough out of the blue.
Dec 3, 2012 at 9:50 PM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
What kind of plugs did you put in?Hopefully not platnuim ones?Also just because the wires are that new doesnt mean they cant be bad.
Dec 4, 2012 at 1:19 AM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Are you setting any codes?
Dec 4, 2012 at 1:19 AM
Avatar
JDENTON83
  • MEMBER
  • 7 POSTS
I cleaned the EGR valve and that seems to have done the trick. Thank you very much for your help!!
Dec 4, 2012 at 4:01 PM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Your welcome thats what were here for i hope you soaked the pintle the spring loaded part in carbon cleaner?If not you need to do that or most likely it will stick again soon most likely.You turn it up side down and push the pintle down and pour in some carbon cleaner and let it soak for atleast a half and hr.Then finsh cleaning it with some carb cleaner.
Dec 4, 2012 at 5:14 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.