how to change heater fan
Dec 8, 2012 at 9:11 AM
1998 SAAB 9-5
NANNYLILY33
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Removal
1. Blower motor is located in engine compartment, behind center of the bulkhead partition. Remove wiper arms. Remove cover over bulkhead.
2. Remove wiper unit. Remove fresh air filter. Unplug blower motor connector. Remove fresh air filter frame.
3. Remove blower motor cover. Remove screw securing blower motor resistor connector. Remove blower motor mounting screws, and lift out blower motor and fan unit.
Installation
To install, reverse removal procedure. Ensure electrical wires are not pinched.
1. Blower motor is located in engine compartment, behind center of the bulkhead partition. Remove wiper arms. Remove cover over bulkhead.
2. Remove wiper unit. Remove fresh air filter. Unplug blower motor connector. Remove fresh air filter frame.
3. Remove blower motor cover. Remove screw securing blower motor resistor connector. Remove blower motor mounting screws, and lift out blower motor and fan unit.
Installation
To install, reverse removal procedure. Ensure electrical wires are not pinched.
Dec 8, 2012 at 4:28 PM
Advertisement