SPONSORED LINKS

1998 Pontiac Grand Prix gauge cluster

Tiny
SETTERGRENH
  • MEMBER
  • 1998 PONTIAC GRAND PRIX
  • 3.8L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 170,000 MILES
My gauge cluster is not working, would the computer accept the gauge cluster from another grand prix
Sunday, July 13th, 2014 AT 3:28 PM

7 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,755 POSTS
Yes, as long as it is the same year, make, model, and style of cluster.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, July 13th, 2014 AT 8:57 PM
Tiny
SETTERGRENH
  • MEMBER
  • 80 POSTS
One more question, my fan for the a/c and heater only works on high if I get another switch would that fix it?
Was this
answer
helpful?
Yes
No
Sunday, July 13th, 2014 AT 11:16 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,755 POSTS
As far as the fan operation, most likely it's not the switch. Since it only works on high, the blower motor resister is most likely the problem. Check that first and let me know what you find.
Was this
answer
helpful?
Yes
No
Monday, July 14th, 2014 AT 7:16 PM
Tiny
SETTERGRENH
  • MEMBER
  • 80 POSTS
After I googled how to replace a blower motor resister, I'm pretty sure that's it, I guess that it's pretty common with the 97-03 Grand Prix's ! I'll have to get that replaced ! Thank You very much !
Was this
answer
helpful?
Yes
No
Monday, July 14th, 2014 AT 9:29 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,755 POSTS
They go bad on a lot of different cars.

Let me know if it takes care of the issue.

Joe
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, July 15th, 2014 AT 9:58 PM
Tiny
SETTERGRENH
  • MEMBER
  • 80 POSTS
Can I ask you one more Please, my brake light on the dash stays on all the time, brake pads are good and it's not low on brake fluid Thank You !
Was this
answer
helpful?
Yes
No
Friday, July 18th, 2014 AT 3:00 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,755 POSTS
It could be a couple things. First, check the simple ones. Make sure the parking brake switch is working and not causing it to stay on. Also, check for wiring to the MC to make sure If there is a sensor there, that isn't a problem.
Was this
answer
helpful?
Yes
No
Saturday, July 19th, 2014 AT 6:00 PM

Please login or register to post a reply.

Related Instrument Cluster Not Working Content

VIEW MORE

Sponsored links