SPONSORED LINKS

Bent tail pipe

Tiny
NAJJIYYAH
  • MEMBER
  • 1998 PLYMOUTH VOYAGER
  • 4 CYL
  • 2WD
  • 144,000 MILES
1998 Plymouth Voyager. My tail pipe is bent at da end how do I bend it back straight. I backed up 2 much hit a cement parking bumper. What tool can I use to bend it back
Sunday, January 2nd, 2011 AT 1:50 PM

3 Replies

Tiny
MMPRINCE4000
  • MECHANIC
  • 8,548 POSTS
Depends on how badly it was bent, if kinked it would probably break.

Best approach is to use a torch and heat until you can bend it.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, January 2nd, 2011 AT 1:58 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
It's not practical to attempt to straighten a bent pipe like that. They kink and never come back to original shape and are very hard to bend, even with heat. It's not an expensive piece and an exhaust shop could replace it pretty cheaply.
Was this
answer
helpful?
Yes
No
Sunday, January 2nd, 2011 AT 2:12 PM
Tiny
CARADIODOC
  • MECHANIC
  • 33,873 POSTS
Bump into the same parking bumper going forward! :)

You can use a bar inside the pipe or a big piece of pipe on the outside as a lever to make it drivable, but like the guys said, it will still be kinked.

Caradiodoc
Was this
answer
helpful?
Yes
No
Monday, January 3rd, 2011 AT 4:19 AM

Please login or register to post a reply.

Related Bumper Content

Sponsored links