Hi I overalled motor but it doesnt want to srart when the oil is in the motor, lifters goes rock hard and no compression. I then drain the oil then the car starts perfeckt but as soon as I start ading oil the car starts missing and dies. Then when I try to start there is no compression. What can be the problem. Please if anyone can help me, or just tell me what the problem is. Thanks alot.
SPONSORED LINKS
Wednesday, July 11th, 2012 AT 7:28 PM
3 Replies
ASEMASTER6371
MECHANIC
52,797 POSTS
Did you replace the lifters? It sounds like they are pumped up.
Are te valves adjustable? You may have them too tight.
What kind of motor are you working with?
Roy
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 7:30 PM
LEON PIETERSE
MEMBER
2 POSTS
Hi yes I have replaced the lifters. It is the 200ie astra. 20 seh.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, July 11th, 2012 AT 7:40 PM
ASEMASTER6371
MECHANIC
52,797 POSTS
Sounds like you have a bad set of lifter. They soudl settle down and center.