car repair

1998 OLDSMOBILE SILHOUETTE
6 CYL • FWD • AUTOMATIC
Avatar
DELGOR
  • MEMBER
  • 2 POSTS
i just replace my starter in 1998 Oldsmobile Truck Silhouette 3.4L SFI 6cyl and when i try too start the car i get a click and nothing had it tested at auto store and it passed and bat too was at 99.9 charge but if i jump it with a battery the starter works the only way it works but car just dies sometimes but when it dies the rpm gage up too 2k and i here a pop like a fues and idea on what going on
Jun 25, 2011 at 2:40 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
Have the charging system check to rule out the alternator to include the battery
Jun 25, 2011 at 10:07 AM
Advertisement
Avatar
DELGOR
  • MEMBER
  • 2 POSTS
its not the alternator just had it checkand it passed
Jun 25, 2011 at 3:53 PM
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
Have the starter motor load tested-test the park/neutral switch and ignition switch
Jun 25, 2011 at 7:27 PM
Avatar
CADIEMAN
  • CAR REPAIR CONTRIBUTOR
  • 3,544 POSTS
check the voltage at starter wire.gm starters would have that problem.its something in the starter.
Jun 25, 2011 at 8:21 PM