1998 Nissan Sentra Injector Power Ground On Both Sides Connector Key On

1998 NISSAN SENTRA
120,000 MILES
Avatar
SHOVELX71
  • MEMBER
  • 6 POSTS
no injector power,ground on both sides of connector with key on.no pulse,36psi fuel,has spark.what supplies power to the injectors?
Mar 28, 2013 at 11:57 PM
Advertisement
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
fuse in the fuse block. 12 volts key on power and the pcm grounds the circuit.

Roy
Mar 29, 2013 at 12:16 AM
Avatar
SHOVELX71
  • MEMBER
  • 6 POSTS
Ck'ed all fuses and relays,all good,scanned with solis,inj pulse wighth.2.85 and when cranking 62. or 69.broken wire?ground on both sides of terminial.I have alldata and doesn't steer me anywhere.Been doing this over 30 years,Chrysler tech 15 of them.Baffled?Thanks for your help! John
Mar 29, 2013 at 2:07 AM
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
how did you get a pulse width of 2.85 with no power to the injectors??

Roy
Mar 29, 2013 at 2:09 AM
Avatar
SHOVELX71
  • MEMBER
  • 6 POSTS
That's what the scanner showed with key on.
Mar 29, 2013 at 2:16 AM
Avatar
SHOVELX71
  • MEMBER
  • 6 POSTS
That's what's baffiling.
Mar 29, 2013 at 2:19 AM
Avatar
SHOVELX71
  • MEMBER
  • 6 POSTS
Thanks for the help Roy!!
Mar 29, 2013 at 2:21 AM
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
did you verify no voltage with a volt meter??

Roy
Mar 29, 2013 at 3:08 AM
Avatar
SHOVELX71
  • MEMBER
  • 6 POSTS
yes I used a logic probe.ground on both sides.also used a noid lite .
Mar 29, 2013 at 10:14 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.