Advertisement

CEL Codes

138,300 MILES • 6 CYL • AUTOMATIC
Avatar
DIETY23
  • MEMBER
  • 5 POSTS
I just recently bought a 1998 nissan maxima. The mechanic who checked it out for me said his scanner could not read and that i may need a new knock sensor. Sure enough the one on there was cracked. So he changed it and gave me tune up. Later i was able to do my emissions and get my tag. I had been having some issues getting it to crank especially in the mornings or after its been sitting for a while. It would drag slow when i tried cranking it or i would have to press the gas pedal to get it to crank. Last week on Monday it finally would not crank at all. I had the whole starter changed last Friday. Right after, my CEL came on!! The mechanic tried checking under the hood and clearing the codes that came up. The CEL went off for about 10 minutes but the next time i cranked up it came back on!! I had the CEL read at Advanced auto and they gave me codes P0325 (knock sensor 1 ckt malfunction bnk 1 or single sensor) and P0110 (IAT Sensor ckt malfunction). How can i have a knock sensor code now and not before? What did changing the starter have to do with these codes popping up? Could they been there all along? What to do to clear them? Thanks!!
Apr 17, 2011 at 8:16 PM
Advertisement
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
Replacing the starter shold not be related to the Knock Sensor (KS) fault but such sensors are known to fail anytime so it could be coincidence that they failed.

As to the IAT and KS trouble code, ensure that all wires are securely plugged in, during replacement of the starter, they might have been disconnected.
Apr 18, 2011 at 9:22 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle