1998 Mitsubishi Mirage Car Stop Working On Working Exaust System By Accident

205 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
my car stop working, the car was on i was working on the exaust system, by accident i cut the cord of the co sensor i guess, is the one that goes after the catalytic converter, and the car stop working, it does crank, the batery is good the ingnition is good, the fuel injection is good, i replace the sensor, replace the spark plugs, even the coil that substitute the distributor in my vehicle, is s 97 mitusubishi mirage, 1.8, i dont know what else to do to have the car running, i think is a eletrical problem
Oct 18, 2012 at 2:39 PM
Advertisement
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,413 POSTS
Check the fuses. If you cut the harness going to an oxygen sensor while the engine was running, you would have shorted out the 12 volts that feeds the heaters in those sensors. That would blow the same fuse that feeds the ignition coil and injectors. You shouldn't even be thinking about replacing a bunch of other parts. They didn't go bad all of a sudden. You're adding a bunch more variables.
Oct 18, 2012 at 3:26 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle