1998 Mitsubishi Eclipse eclipse

170,000 MILES • 2.0L • 4 CYL • FWD • MANUAL
Avatar
TERYN5113
  • MEMBER
  • 3 POSTS
car starts fine runs with a miss similar to a bad plug or wire but stays running. When it reaches operating temp. if you shut it off and try restarting it will run for maybe five seconds then dies. no cutting out almost like cutting all electrical power to the car. still has spark and fuel. new cam sensor, crank sensor plugs, wires..
Mar 10, 2015 at 2:53 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
Do you mean when it won't restart, it still has spark and fuel? If so, one has to be weak or the injectors aren't getting power. Tell me, have you checked for an injector pulse when this happens? Will the engine restart if you use starting fluid?
Mar 10, 2015 at 10:22 PM
Avatar
TERYN5113
  • MEMBER
  • 3 POSTS
Yes I have good injector pulse and good fuel pressure seems now it is pulling a cam code every time it runs and dies this will be the third cam sensor installed would you recommend a cam sensor from the dealership?
Mar 11, 2015 at 2:47 AM
Avatar
TERYN5113
  • MEMBER
  • 3 POSTS
will not restart if adding starting fluid
Mar 11, 2015 at 2:57 AM
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
Okay, then it isn't getting spark. Or, if it is, it is a weak spark. Yes, I would recommend an OEM part over the aftermarket. Since that is the code you're getting, that would be my first guess. However, if that doesn't take care of the problem, recheck for spark. It should be a hot blue snapping spark. If it is weak or doesn't exist, check both the crank sensor and the coil.
Mar 11, 2015 at 4:00 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle