SPONSORED LINKS

No heat

Tiny
MCCREED
  • MEMBER
  • 1998 MERCURY SABLE
  • 200,000 MILES
No heat. I have backflushed several times. The actuator door is working. It seems as the hoses from the heater core all the way back to the motor are all cool. Temperature hand reads fine.
Wednesday, December 12th, 2012 AT 9:56 PM

1 Reply

Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
Check both hoses at heater core if both hot its broken blend door (since you already check blend motor and working )
If one hot and other cool or cold need to isolate heater core and flush again or remove and replace heater core
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, December 13th, 2012 AT 12:15 AM

Please login or register to post a reply.

Related Heater Heater Core Content

Heater Core Replacement
GUIDE
Heater Core Replacement
A heater core is positioned inside the car and is part of the HVAC system. Hot engine coolant is run through the core which air is blown through via the blower motor which ...
VIEW MORE

Sponsored links