SPONSORED LINKS

1998 Mazda B2200 Fuel problem

Tiny
OGGIES
  • MEMBER
  • 1998 MAZDA B2200
  • 2.2L
  • 4 CYL
  • 2WD
  • MANUAL
  • 120,000 MILES
I can prime it and it will start, but will not stay running. Does have fuel at carb.
Sunday, October 4th, 2015 AT 2:34 PM

4 Replies

Tiny
OGGIES
  • MEMBER
  • 2 POSTS
Sorry, it is 1988 Mazda B2200 with 2.2
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Sunday, October 4th, 2015 AT 2:53 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check fuel pressure with a gauge 55-71 psi auto parts rent it. Also make sure that the inertia switch isn't engaged it's under right side of dash below glove box. There should be a Schrader valve on fuel rail to hook up gauge. Also try resetting security system if no manual look online.
Was this
answer
helpful?
Yes
No
Sunday, October 4th, 2015 AT 3:36 PM
Tiny
OGGIES
  • MEMBER
  • 2 POSTS
It is a carburetor, not fuel injected. But thank you anyway
Was this
answer
helpful?
Yes
No
Sunday, October 4th, 2015 AT 4:12 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Ok then it should be at least3.5 lbs and flow about a pint or so in 30 seconds. It may be time for a rebuild due to alcohol in todays fuels. We only list a b2500 for 98 inour manual.
Was this
answer
helpful?
Yes
No
Sunday, October 4th, 2015 AT 4:38 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links