1998 Jeep Cherokee torque pressure

BARBARA1963

MEMBER
1998 JEEP CHEROKEE
4.0L
6 CYL
2WD
AUTOMATIC

I am changing the head on this jeep and when I get ready to put it back together I would like to know how much torque pressure do I use on the bolts?

Wednesday, February 19th, 2014 AT 2:42 PM

1 Reply

OBXAUTOMEDIC

MECHANIC
3,711 POSTS

Hello,

Here is the Torque Specs.

Stage 1 = 22 ft lbs (30 Nm)

Stage 2 = 45 ft lbs (61 Nm)

Stage 3 = 110 ft lbs (149 Nm)

Except the #11 Bolt It gets Torqued to 110 ft lbs (136 Nm)

Also I attached Torque Sequence

Image (Click to make bigger)

Please login or register to post a reply.

Related Cylinder Head Replace/Remove Content

1996 Jeep Cherokee Replaced Head

Engine Performance Problem 1996 Jeep Cherokee 6 Cyl Four Wheel Drive Manual Unknow Miles Just Replaced Head After Bad Overheat And...

Asked by edgates ·

6 ANSWERS

1996

JEEP CHEROKEE

VIDEO

Cylinder Head Removal

Instructional repair video

Cracked Cylinder Head

I Am Working On A 2000 Jeep Cherokee 4x4. It Came In The Shop With A 8 Inch Crack In The Cylinder Head With A Blown Head Gasket, But Was...

Asked by tyranger ·

2 ANSWERS

2000

JEEP CHEROKEE

1994 Jeep Cherokee Head Bolt Sequence

I Am Trying To Find Out The Proper Sequence And Specs For Tightening The Head Bolts.

Asked by blsc309 ·

1 ANSWER

1994

JEEP CHEROKEE

2003 Jeep Cherokee Valve Train

#4 Cyl. Rocker Arm Fell Out Without No Signs Of Any Problems. Such As Ticking Or Missfireing. No Signs Of Wear Or Broken Or Bent Valve...

Asked by a1rp1pl ·

1 ANSWER

2003

JEEP CHEROKEE

1991 Jeep Cherokee Torque Specs

Need Torque Specs For Cylinder Head Bolts

Asked by a.bocanegra ·

1 ANSWER

1991

JEEP CHEROKEE

1998 Jeep Cherokee torque pressure

1 Reply

Please login or register to post a reply.

Related Cylinder Head Replace/Remove Content

1996 Jeep Cherokee Replaced Head

Cracked Cylinder Head

1994 Jeep Cherokee Head Bolt Sequence

2003 Jeep Cherokee Valve Train

1991 Jeep Cherokee Torque Specs

Sponsored links