1998 Honda Accord clutch master cylinder , and slave cylin

1998 HONDA ACCORD
110,000 MILES • 4 CYL • 2WD • MANUAL
Avatar
TERRISB79
  • MEMBER
  • 2 POSTS
clutch pedal had no pressure , and changed the slave cylinder , and the master cylinder .... still no pressure in the pedal .....both parts brand new ...
Feb 18, 2008 at 11:37 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
It sounds weird but have you tried bleeding it Hydraulic line is it leaking?
Feb 18, 2008 at 11:50 PM
Advertisement
Avatar
TERRISB79
  • MEMBER
  • 2 POSTS
yes i tried and it won't come out the slave end from what i see , Does the bolt on the slave end , next to the line have to be loose ?
Feb 19, 2008 at 2:13 PM
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
It should looked like the brake caliper bleeder screw valve-
Feb 19, 2008 at 4:27 PM
Avatar
PLASTICPONY51
  • MEMBER
  • 2 POSTS
Might b the spring that needs to b adjusted behind the clutch pedal ARM.
Nov 23, 2011 at 5:09 AM