SPONSORED LINKS

1998 GMC Truck wont start

Tiny
DET61
  • MEMBER
  • 1998 GMC TRUCK
  • 5.7L
  • V8
  • 4WD
  • AUTOMATIC
  • 185,000 MILES
Over the last year My truck would run rough sometimes, It has new fuel injectors, fuel pump, upper manifold, distributer cap, plugs, wires, cap, rotor, coil, throttle position sensor ad every other sensor has also been replaced, So I replaced the ECM and it would fire for about 1 second then dye, I put the old one back in for now so that I can drive it, What do I need to do to make it run with the new ECM.
SPONSORED LINKS
Thursday, October 23rd, 2014 AT 5:24 PM

4 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,700 POSTS
The new ECM may need programmed. How bad is the rough running? Is this the original engine? Have you checked engine compression?
Was this
answer
helpful?
Yes
No
Thursday, October 23rd, 2014 AT 5:44 PM
Tiny
DET61
  • MEMBER
  • 3 POSTS
It is the original engine, I have not checked the compression, It runs really rough but at around 60 mph + on the highway it will run great most of the time.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, October 24th, 2014 AT 9:17 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,700 POSTS
I question if it deals with the ECM. Have you ever cleaned the injection system? Also, with this many miles, you may want to check compression.
Was this
answer
helpful?
Yes
No
Friday, October 24th, 2014 AT 10:48 AM
Tiny
DET61
  • MEMBER
  • 3 POSTS
I put in all new fuel injectors, I'll try to check the compression this weekend.
Was this
answer
helpful?
Yes
No
Friday, October 24th, 2014 AT 3:50 PM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links