Air coming out of low and high port A/C system

no, the service valves are leaking and must be replaced.

Roy

I can understand the high port. I just changed the accumulator not more than 2 hours ago, and that has my low port.

check all your connections.when u vacuum down the sys. to -28 to -30 tighten down the low and high side gauges turn the pump off and the vacuum should stay their for 15 minutes.only then u can fill it.

That is not possible if my low port and high port is leaking right? As stated earlier, I just changed out accumulator that has my low end port. When put air in it air comes out of portss but stops when i put caps on Them. I am process of going to autozone to replace high port but can not screw off low port of accumulator. Thanks.

yes, it can hold vacuum with the gauges but leak when removed. the caps are just dirt covers, not sealers.

you need to replace the service valves.

Roy

if the accumulater is leaking return it its new.use a valve core tool to remove the schrater valve on the high side hose and replace it.

I have concluded that is the high port. Yes, I will replace valve. thanks.

make sure u get the that is for a/c valves if it does not help you will have to replace the high side hose also.