1998 Gmc C1500 Just Took Truck Apart Did Both Head Gaskets After Putting Back

1998 GMC C1500
101 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
i just took the truck apart and did both head gaskets...after putting it all back together, the truck will not do anything. meaning electrically it acts as if there is no power. i checked the battery voltage which was just over 12, i also checked at the started which was also just over 12, going to the fuse box, the fuses apear to be good but no power there...i have double checked the grounds and all apear to be fine...whats the next step, no lights in the cabin nor anywhere work, and appears to be dead
Dec 24, 2012 at 7:19 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
make sure all the wires are on the big stud on starter. there is the battery cable and a couple of fusible links as well.

Roy
Dec 24, 2012 at 10:02 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.