My pedal goes to the floor after I replaced calipers.

Tiny
QUESTION
  • MEMBER
  • 1998 FORD RANGER
  • 40,000 MILES
I changed my pads and discovered that my calipers were leaking so I replaced them. After replacing calipers I bled the system but I had no brakes. I replaced the master cylinder and bled the system, still no brakes.
Sunday, November 20th, 2011 AT 12:47 AM

7 Replies

Tiny
CARADIODOC
  • MECHANIC
  • 33,910 POSTS
Did you bench-bleed the new master cylinder before installing it?
Was this
answer
helpful?
Yes
No
Sunday, November 20th, 2011 AT 1:19 AM
Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,005 POSTS
THIS MAY HELP

IS THIS THE WAY YOU APPROACHED IT?

http://www.2carpros.com/questions/1999-ford-f-150-brakes--3

THE MEDIC
Was this
answer
helpful?
Yes
No
+1
Sunday, November 20th, 2011 AT 2:58 AM
Tiny
QUESTION
  • MEMBER
  • 2 POSTS
Yes I bench bled the master cylinder, placed it on the truck and bled all four wheels and still no brakes at the front wheels.
Was this
answer
helpful?
Yes
No
+1
Monday, November 21st, 2011 AT 3:37 AM
Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,005 POSTS
DO YOU HAVE A HARD PEDAL?

DO YOU GET HARD PEDAL AND DROPS AS YOU BLEED THE FRONT CALIPERS---THEN "RECOVERS" TO FULL PEDAL WHEN BLEEDERS ARE CLOSED AND A FEW PUMPS ARE PERFORMED?

THIS IS SORTA PUZZLING--PLEASE ANSWER AND ADD ANYTHING ELSE THAT COULD BE RELEVANT

THE MEDIC
Was this
answer
helpful?
Yes
No
Monday, November 21st, 2011 AT 3:54 AM
Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,005 POSTS
IS THIS THE CALIPER YOU HAVE?

THE MEDIC
Was this
answer
helpful?
Yes
No
Monday, November 21st, 2011 AT 4:05 AM
Tiny
QUESTION
  • MEMBER
  • 2 POSTS
When bleeding the front brake after several pumps the pedal was hard but when the bleed screw was opened the pedal did not move but fluid came out of the bleed screw.
Was this
answer
helpful?
Yes
No
+2
Monday, November 21st, 2011 AT 4:20 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,867 POSTS
Have you checked the rubber brake hoses to the front?
Was this
answer
helpful?
Yes
No
Monday, November 21st, 2011 AT 4:25 AM

Please login or register to post a reply.

Sponsored links