Advertisement

1998 Ford Mustang fuel pump replacement issue

11,800 MILES
Avatar
REVBURN
  • MEMBER
  • 2 POSTS
After replacing the fuel pump( it is a 2 line all in one pump assembly) on my 98 mustang I try to start it and I'm not building any fuel pressure to my engine , I can hear the pump running but when I disconnect the lines from the pump no gas comes out like it did when I originally disassembled it. Also if I pour gas right into the engine it will start and run for 10 to 15 seconds then die off.
Nov 9, 2013 at 4:26 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
check for a blocked fuel filter or line first or connected wrong
Nov 9, 2013 at 9:56 PM
Advertisement
Avatar
REVBURN
  • MEMBER
  • 2 POSTS
Ok, what is the easiest way to check for blockages in the lines
Nov 10, 2013 at 3:41 AM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
disconnect at fuel filter, if still no fuel then the pump has either incorrectly installed or a hose connecting it has hole in it. then go from there I fyou have fuel at filter install a new filter then see what you have.
Nov 10, 2013 at 3:43 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle