torque spec

4WD • MANUAL
Avatar
98F150NUT
  • MEMBER
  • 4 POSTS
What is the torque specs for the ford f150 4.6L Windsor.
Feb 19, 2011 at 9:18 PM
Avatar
PROTECH1980
  • MEMBER
  • 901 POSTS
torque specs for what?
Feb 19, 2011 at 9:21 PM
Avatar
98F150NUT
  • MEMBER
  • 4 POSTS
Sorry I need the specs for the head gasket, Are the car 4.6 specs different than the truck 4.6??
Feb 19, 2011 at 9:34 PM
Avatar
PROTECH1980
  • MEMBER
  • 901 POSTS
4.6L Windsor TORQUE ALL BOLTS IN SEQUENCE
step 1 tighten 28-31 ft lbs
step 2 tighten additional 85-95 degrees
step 3 loosen 360 degrees
step 4 tighten 28-31 ft lbs
step 5 tighten additional 85-95 degrees
step 6 tighten additional 85-95 degrees
Feb 19, 2011 at 9:52 PM
Avatar
98F150NUT
  • MEMBER
  • 4 POSTS
Ok thank you.
One more question, when i do this will i go through and torque them all then go to step 2 and so on? Or stick with one bolt at a time? This is my first time with the newer motor, and TTY bolts..
Feb 20, 2011 at 7:21 AM
Avatar
PROTECH1980
  • MEMBER
  • 901 POSTS
First step, yes torque all bolts in SEQUENCE, then go to next step and so on, untill you complete all steps.
Feb 20, 2011 at 7:28 AM
Avatar
98F150NUT
  • MEMBER
  • 4 POSTS
Thank you so much.. I'm getting ready to do the head gaskets, I have the dreaded oil weep on the right head at the rear.. I've also recently discovered that the motor was changed prior to purchase. My rig is a 98' F150 with a PI motor..
Feb 20, 2011 at 8:01 PM
Avatar
PROTECH1980
  • MEMBER
  • 901 POSTS
Your welcome and good luck with the project.
Feb 21, 2011 at 10:07 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle