That's WAY too much to type. Do yourself a favor and buy the factory service manual from the dealer. It will have answers to all the questions you will have along the way. They typically don't spell out a step-by-step list because there's too many variables to cover, but they do a nice job of showing diagrams with engine mounts and other things that come off, and there's an entire section on how tight to make the bolts when you put it back together. If you can't find a manual, I can find some old dvds.
The way most of us learned to replace an engine was to just start taking things apart that are preventing it from coming out. The main things are the torque converter bolts, exhaust pipe bolts, and don't forget the throttle linkage and wire harnesses. Masking tape is a good way to mark wires and hoses. You can also take a few photographs before you start if you think you're going to forget where something goes.
Apr 6, 2012 at 9:31 PM