SPONSORED LINKS

Clutch line dont open for fluid can get to slave.

Tiny
ANONYMOUS
  • MEMBER
  • 1998 FORD F-150
  • 199,000 MILES
Clutch line dont open for fluid can get to slave cylinder.
Saturday, October 27th, 2012 AT 10:50 PM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Chektosee if the master cyl is any good, take the line off and push to see if fluid comesout. Put finger over the line after pushing fluid so not to let air in system.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, October 27th, 2012 AT 11:00 PM
Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,005 POSTS
SORTA 'SPLAIN THAT IN A LONGER SENTENCE. TAKE YOUR TIME. RELAX!

---INCLUDE EXACTLY WHAT IS WRONG

. AND WHAT YOU HAVE TRIED TO DO TO FIX IT

THE MEDIC
Was this
answer
helpful?
Yes
No
Saturday, October 27th, 2012 AT 11:02 PM

Please login or register to post a reply.

Related Transmission Clutch Slave Cylinder Content

Throwout Bearing - Secondary Cylinder Replacement
GUIDE
Throwout Bearing - Secondary Cylinder Replacement
A throwout bearing/secondary cylinder is used to apply force against the clutch pressure plate to release the clutch disc and should be replaced as part of the normal clutch...
VIEW MORE

Sponsored links