replacing thermostat on a 98 escort. how do you get access to two bolts on housing.
Nov 28, 2010 at 1:26 AM
98 escort thermostat
1998 FORD ESCORT
MAZZINO123
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
REMOVAL
Disconnect the battery ground cable.
Remove the air cleaner outlet tube.
Drain the engine coolant to a point below the water thermostat.
Disconnect the water temperature indicator sender unit and the engine coolant temperature sensor electrical connectors.
Disconnect the upper radiator hose and the heater coolant hose from the water thermostat housing.
Remove the water thermostat housing bolts, the water thermostat housing, and the water thermostat.
Disconnect the battery ground cable.
Remove the air cleaner outlet tube.
Drain the engine coolant to a point below the water thermostat.
Disconnect the water temperature indicator sender unit and the engine coolant temperature sensor electrical connectors.
Disconnect the upper radiator hose and the heater coolant hose from the water thermostat housing.
Remove the water thermostat housing bolts, the water thermostat housing, and the water thermostat.
Nov 28, 2010 at 1:32 AM
Advertisement