Have a problem starting the truck. I then notice when I plugged in the OBD II the truck starts, then the next time no start so I plugged in the OBD again to start. Next time, I notice the OBD would not come on, and truck would not start, so I wiggled it around some and when the OBD LCD came on I started the truck. From then on for about a week I would just move some of the wiring in the back of the connections and the truck would start.
This time when I tried, it just would not start for nothing. I even removed the connector to see if I had any loose or disconnected wiring, but they all looked fine. I tried so many times the battery died, so I put an emergency jumper starter to continue, still no luck to getting it started. It just cranks and cranks! I know it has to be something simple, I just can not figure out what it is. So frustrated.
Any suggestions what it could be?
I would love to make a donation on my next question I will ask. Thank You!
This time when I tried, it just would not start for nothing. I even removed the connector to see if I had any loose or disconnected wiring, but they all looked fine. I tried so many times the battery died, so I put an emergency jumper starter to continue, still no luck to getting it started. It just cranks and cranks! I know it has to be something simple, I just can not figure out what it is. So frustrated.
Any suggestions what it could be?
I would love to make a donation on my next question I will ask. Thank You!
Sep 13, 2014 at 3:16 AM
