SPONSORED LINKS

1998 Dodge Neon no run SOHC 2.0l Neon

Tiny
JIMBOBBUCKEYBOW
  • MEMBER
  • 1998 DODGE NEON
  • 2.0L
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 140,000 MILES
No compression on cylinders 1 3 and 4 have 180 on cylinder 2 timming marks line up belt good could it have bent valves cars getting fuel and good spark maby blown head gasket any help would be grate
Friday, January 23rd, 2015 AT 6:03 PM

5 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
If there no compression, you have to have valves stuck open. Have you removed the valve cover to check?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, January 23rd, 2015 AT 7:51 PM
Tiny
JIMBOBBUCKEYBOW
  • MEMBER
  • 4 POSTS
Yes have removed valve cover don, t see any thing rong pulled fuel pump relay was going to put oil in each cylinder with no compresion recheck compresion hopeing compresion will come back never had only good compresson on one cylinder if it is stuck valves how do I free them up?
Was this
answer
helpful?
Yes
No
Friday, January 23rd, 2015 AT 9:04 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Either the timing has jumped, the valves are stuck open, or you have holes in the tops of 3 pistons. As far as fixing valves that are stuck open, it really is based on the cause. Are you certain the timing is correct and with the valve cover off, you don't see any sticking valves?
Was this
answer
helpful?
Yes
No
Saturday, January 24th, 2015 AT 6:04 PM
Tiny
JIMBOBBUCKEYBOW
  • MEMBER
  • 4 POSTS
Im thinking exaust valves bent in cylinder 1 3 4 with plugs out when I put compressed air down number 1 cylinder it alows air to come back though 3 and 4 cylinder so don, t thank theres hole in pistons whan car came to me timming belt was off had snaped bolt for tensioner cam some one has been in here before no need to take cam bolt loose replaced with used asembley also replaced inner timing cover and outer cover replaced timing belt made sure marks lined up my next step is to pull head and hoop I can find good head from bone yard
Was this
answer
helpful?
Yes
No
Sunday, January 25th, 2015 AT 11:10 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
I agree. I feel that is what happened. Let me know what you find when you remove the head.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, January 25th, 2015 AT 8:27 PM

Please login or register to post a reply.

Related Cylinder Head Gasket Blown Content

Cylinder Head Gasket Blown Test
GUIDE
Cylinder Head Gasket Blown Test
Diagnosing a blown head gasket in an automotive engine requires a systematic approach to ensure accurate results. This guide will walk you through the necessary steps to...
VIEW MORE

Sponsored links