1998 Dodge Dakota Trk Started Running Bad Took Thought Fuel Pump Would Stall

1998 DODGE DAKOTA
96,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
Trk started running bad I took it in thought it was the fuel pump. It would stall out on me. The guy said he tested the fuel pump and it was good. He said it needed a tune up so he put new plugs and wires complete tuneup. I pick it up and it ran good for 2 days thn it started stalling out ck engine light came on and it was backfiring out I'd tailpipe.took it back to guy he put a new distr cap. And crank shaft sensor pick it up drove it one day and it doing the same thing again . Any suggestions?
Nov 9, 2012 at 3:25 PM
Advertisement
Avatar
JDL
  • ASE Certified Mechanic
  • 16,098 POSTS
  • ASE Certified Mechanic
You may need to check cylinder compression. Any applicable trouble codes? I believe you can check codes yourself on this vehicle by cycling the ignition switch, you turn key just till the dash lites come on, no further, no crank. Cycle the key on--off, on--off, on, the the mil on the dash starts flashing, you count the flashes to get the codes. Your looking for two digit codes.
Nov 9, 2012 at 4:45 PM
Avatar
JDL
  • ASE Certified Mechanic
  • 16,098 POSTS
  • ASE Certified Mechanic
My bad, the mil method will not work on this vehicle according to my info. What is litre size of engine? Other things that can cause backfiring. Ignition timing--- vacuum leaks--exhaust problems-- other.
Nov 9, 2012 at 4:53 PM
Avatar
JDL
  • ASE Certified Mechanic
  • 16,098 POSTS
  • ASE Certified Mechanic
At the least, you need an obd2 code reader to check codes, yourself. Some of the national brand autostores used to check codes for free.
Nov 9, 2012 at 4:59 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.