1998 Dodge Dakota tps sensor

try using a little hammer and drive torx bit in and see if it will break loose that way.

I'VE GOT PICS ON A LARGER SCALE OF WHAT Hmac300 JUST EXPLAINED

LIGHT TAPPING WITH SLIGHT CCW PRESSURE USUALLY WORKS/ THIS PROCESS IS ESCALATED AS THE BOLT SIZE INCREASES ON BIGGER STUFF

YOU MAY HAVE TO "ADD" AN EXTENSION INTO THE MIX IF ITS HARD TO REACH

1976-1986 JEEP CJs WERE ALMOST COMPLETELY HELD TOGETHER WITH TORX FASTENERS. THE DASH/ DIFFERENTIAL COVERS/ ROLL BAR/ HOOD HARDWARE/ SUN VISORS/ THE LIST GOES ON!

HAVING LEARNED MY LESSON(S) FROM 1983-NOW, WHEN I REMOVE 'EM, I SLING 'EM IN THE WOODS AND REPLACED THEM WITH A REAL BOLT...I DON'T THINK THERE'S EVEN A-ONE LEFT ON MY PRESENT '77 CJ-5!

IN MY PICS I WAS UNABLE TO FIND A TORX BOLT FOR A DEMONSTRATOR (THEY'RE ALL IN THE WOODS!), SO I USED AN ALLEN HEAD BOLT


THE MEDIC

PREVIOUS LAST PIC OF THE PROCESS

I WOULD NORMALLY BE APPLYING SLIGHT CCW PRESSURE ON THE VISE GRIPS WHILE TAPPING

I HAD TO HOLD THE CAMERA AND HAMMER, I RAN OUT OF HANDS!

RETURN WITH GOOD NEWS!

MERRY CHRISTMAS

THE MEDIC

Most of the time you have sufficient space so you can simply grab the head of the screw with a small pair of vise grips or channel locks to crack it loose. It will move easily once cracked loose. Just make sure you have a solid grip on the bolt so the vise grips don't slip and make it worse.