98 dodge avenger 2.5 v6 p1391 loss of camshaft crank. is there a camshaft sensor that i can replace or do i need a new distributor
Jul 7, 2011 at 3:48 PM
camshaft sensor
1998 DODGE AVENGER
BADAVENGER
- MEMBER
- 3 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
My info says intermittent loss of cam or crankshaft sensor signal. You can check the sensor connectors. The camshaft position sensor is in the distributor. The crankshaft position sensor is on the bell-housing. At the sensors, you can check ref voltage-- ground--signal.
Are there any driveability issues?
Are there any driveability issues?
Jul 7, 2011 at 4:28 PM
Advertisement
my scanner says p1391 loss of camshaft crank. is the camshaft sensor built into the distributor or is the sensor replaceable. its not the crank sensor because it starts fine and don't stall. it has a rough idle and misfire, bucks while driving. thanks
Jul 7, 2011 at 4:52 PM
You can replace the cam sensor by itself.
Image (Click to enlarge)
Jul 7, 2011 at 5:02 PM