I think there is a problem with front panel
Feb 20, 2012 at 10:34 AM
How to fix the rear viper
ABI
- MEMBER
- 2 POSTS
How about a clue as to the symptoms, problem, observations, etc.
Feb 20, 2012 at 12:46 PM
:) Tank,s for the fast answer .
I have chekt the rar viper motor and the washer motor and they are working but nothing happens when i push the buttens and the fan dose only work at hiest speed .
I changed the panel with a simular panel from a 1996 voyager but then all the buttens went flashing all the time but the fan was working as befor at hiest speed . all the other tings and elektronic are working as they shuled eccept the remot lock for the drivers dorr dose not work .
I have chekt the rar viper motor and the washer motor and they are working but nothing happens when i push the buttens and the fan dose only work at hiest speed .
I changed the panel with a simular panel from a 1996 voyager but then all the buttens went flashing all the time but the fan was working as befor at hiest speed . all the other tings and elektronic are working as they shuled eccept the remot lock for the drivers dorr dose not work .
Feb 20, 2012 at 2:35 PM
Since you replaced the HVAC Computer, which obviously requires unplugging it, see if this helps:
If it doesn't work, I'll still be here.
If it doesn't work, I'll still be here.
Feb 20, 2012 at 3:23 PM
check for voltage going to the motor with a test light.the a/c fan has a resister panel screwed into the top of the a/c case.2 screws hold it in.unplug and remove it youll see rows of wire on it.
Feb 20, 2012 at 3:36 PM